Хм, а yii в папке site?
Site была приведена для примера, не думала что придется так глубоко капать. Вообще не site, а appstan
conf/extra/httpd-xampp.conf
Код: Выделить всё
#
# XAMPP settings
#
<IfModule env_module>
SetEnv MIBDIRS "C:/xampp/php/extras/mibs"
SetEnv MYSQL_HOME "\\xampp\\mysql\\bin"
SetEnv OPENSSL_CONF "C:/xampp/apache/bin/openssl.cnf"
SetEnv PHP_PEAR_SYSCONF_DIR "\\xampp\\php"
SetEnv PHPRC "\\xampp\\php"
SetEnv TMP "\\xampp\\tmp"
</IfModule>
#
# PHP-Module setup
#
LoadFile "C:/xampp/php/php5ts.dll"
LoadModule php5_module "C:/xampp/php/php5apache2_4.dll"
<FilesMatch "\.php$">
SetHandler application/x-httpd-php
</FilesMatch>
<FilesMatch "\.phps$">
SetHandler application/x-httpd-php-source
</FilesMatch>
#
# PHP-CGI setup
#
#<FilesMatch "\.php$">
# SetHandler application/x-httpd-php-cgi
#</FilesMatch>
#<IfModule actions_module>
# Action application/x-httpd-php-cgi "/php-cgi/php-cgi.exe"
#</IfModule>
<IfModule php5_module>
PHPINIDir "C:/xampp/php"
</IfModule>
<IfModule mime_module>
AddType text/html .php .phps
</IfModule>
ScriptAlias /php-cgi/ "C:/xampp/php/"
<Directory "C:/xampp/php">
AllowOverride None
Options None
Order deny,allow
Deny from all
<Files "php-cgi.exe">
Allow from all
</Files>
</Directory>
<Directory "C:/xampp/cgi-bin">
<FilesMatch "\.php$">
SetHandler cgi-script
</FilesMatch>
<FilesMatch "\.phps$">
SetHandler None
</FilesMatch>
</Directory>
<Directory "C:/xampp/htdocs/xampp">
<IfModule php5_module>
<Files "status.php">
php_admin_flag safe_mode off
</Files>
</IfModule>
AllowOverride AuthConfig
</Directory>
<IfModule alias_module>
Alias /security "C:/xampp/security/htdocs/"
<Directory "C:/xampp/security/htdocs">
<IfModule php5_module>
<Files "xamppsecurity.php">
php_admin_flag safe_mode off
</Files>
</IfModule>
AllowOverride AuthConfig
Order allow,deny
Allow from all
</Directory>
Alias /licenses "C:/xampp/licenses/"
<Directory "C:/xampp/licenses">
Options +Indexes
<IfModule autoindex_color_module>
DirectoryIndexTextColor "#000000"
DirectoryIndexBGColor "#f8e8a0"
DirectoryIndexLinkColor "#bb3902"
DirectoryIndexVLinkColor "#bb3902"
DirectoryIndexALinkColor "#bb3902"
</IfModule>
Order allow,deny
Allow from all
</Directory>
Alias /phpmyadmin "C:/xampp/phpMyAdmin/"
<Directory "C:/xampp/phpMyAdmin">
AllowOverride AuthConfig
Order allow,deny
Allow from all
</Directory>
Alias /webalizer "C:/xampp/webalizer/"
<Directory "C:/xampp/webalizer">
<IfModule php5_module>
<Files "webalizer.php">
php_admin_flag safe_mode off
</Files>
</IfModule>
AllowOverride AuthConfig
Order allow,deny
Allow from all
</Directory>
</IfModule>
#
# New XAMPP security concept
#
<LocationMatch "^/(?i:(?:xampp|security|licenses|phpmyadmin|webalizer|server-status|server-info))">
Order deny,allow
Deny from all
Allow from ::1 127.0.0.0/8 \
fc00::/7 10.0.0.0/8 172.16.0.0/12 192.168.0.0/16 \
fe80::/10 169.254.0.0/16
ErrorDocument 403 /error/XAMPP_FORBIDDEN.html.var
</LocationMatch>
conf/extra/httpd-vhosts.conf
Код: Выделить всё
#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
# Use name-based virtual hosting.
#
##NameVirtualHost *:80
#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
#
##<VirtualHost *:80>
##ServerAdmin [email protected]
##DocumentRoot "C:/xampp/htdocs/dummy-host.localhost"
##ServerName dummy-host.localhost
##ServerAlias www.dummy-host.localhost
##ErrorLog "logs/dummy-host.localhost-error.log"
##CustomLog "logs/dummy-host.localhost-access.log" combined
##</VirtualHost>
##<VirtualHost *:80>
##ServerAdmin [email protected]
##DocumentRoot "C:/xampp/htdocs/dummy-host2.localhost"
##ServerName dummy-host2.localhost
##ServerAlias www.dummy-host2.localhost
##ErrorLog "logs/dummy-host2.localhost-error.log"
##CustomLog "logs/dummy-host2.localhost-access.log" combined
##</VirtualHost>
<VirtualHost 127.1.0.1:80>
#указываем локальный ip адрес
DocumentRoot "C:\xampp\htdocs\crystalspring"
# Путь к папке www нашего сайта
ErrorLog "C:\xampp\htdocs\crystalspring\log\error_log.txt"
# Путь к файлу для записи ошибок
</VirtualHost>
<VirtualHost 127.1.0.2:80>
#указываем локальный ip адрес
DocumentRoot "C:\xampp\htdocs\appstan"
# Путь к папке www нашего сайта
ErrorLog "C:\xampp\htdocs\appstan\log\error_log.txt"
# Путь к файлу для записи ошибок
</VirtualHost>
Здеся я виртуальный хост настраивала для Appstan. Но у меня что через localhost что через виртуальный заходить, все равно проблемы с index.php
conf/extra/httpd-userdir.conf
Код: Выделить всё
# Settings for user home directories
#
# Required module: mod_userdir
<IfModule userdir_module>
#
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Note that you must also set
# the default access control for these directories, as in the example below.
#
UserDir "My Documents/My Website"
#
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#
<Directory "C:/Documents and Settings/*/My Documents/My Website">
AllowOverride FileInfo AuthConfig Limit Indexes
Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
<Limit GET POST OPTIONS>
Order allow,deny
Allow from all
</Limit>
<LimitExcept GET POST OPTIONS>
Order deny,allow
Deny from all
</LimitExcept>
</Directory>
</IfModule>
conf/extra/httpd-default.conf
Код: Выделить всё
#
# This configuration file reflects default settings for Apache HTTP Server.
#
# You may change these, but chances are that you may not need to.
#
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 5
#
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
#
UseCanonicalName Off
#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
#
AccessFileName .htaccess
#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
#
ServerTokens Full
#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#
ServerSignature On
#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off
C:\xampp\htdocs\appstan\log\error_log.txt 
Правда я со сборками, виндой и апачем давно не работаю, но в целом все нормально и должно работать.